Caterpillar D5 LGP buldózer

ENGINE - Blow by: Minimal
ENGINE - Knocking: No knocking
ENGINE - Air cleaners: New
ENGINE - Any smoke: Minimal to none
ENGINE - Oil or fuel leaks: None visible
ENGINE - General running condition: Runs well
TRANSMISSION - Gear change: Changes well
TRANSMISSION - Steering: Responsive steering
TRANSMISSION - Oil leaks: None visible
TRANSMISSION - Is the transmission noisy?: No noise
TRANSMISSION - Torque converter: No noise or juddering
TRANSMISSION - Controls: Good tight controls
TRANSMISSION - General running condition: Moves well
UNDERCARRIAGE - Shoe height: 55mm 90%
UNDERCARRIAGE - Shoes - any wear in trailing edge: Minimal
UNDERCARRIAGE - Rail height: 117mm 80%
UNDERCARRIAGE - Any signs of link failure?: No
UNDERCARRIAGE - Average diameter of pins and bushings: 64mm 80%
UNDERCARRIAGE - Have pins been turned on chains: No
UNDERCARRIAGE - Sprockets: 75mm gape, 18mm tips. 80%
IDLERS - UNDERCARRIAGE - Left side front idler: 55mm x 25mm, 90%
IDLERS - UNDERCARRIAGE - Left side rear idler: 55mm x 25mm, 90%
IDLERS - UNDERCARRIAGE - Right side rear idler: 55mm x 25mm, 90%
IDLERS - UNDERCARRIAGE - Right side front idler: 5mm x 25mm, 90%
TOP ROLLERS - UNDERCARRIAGE - Left side top roller: 181mm x 182mm, 100%
TOP ROLLERS - UNDERCARRIAGE - Right side top roller: 164mm x 165mm, 85%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 1: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 2: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 3: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 4: Visual only, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 5: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 6: 195mm x 195mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 7: 195mm x 196mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE - Roller 8: 196mm x 196mm, 95%
CAB - Cab mounts - any wear?: No wear
CAB - Any wiring for laser system: Yes
CAB - Back up alarm: Loud and clear
CAB - Battery isolator switch: Manual
CAB - Lights: All lights working
CAB - Wipers: All working
CAB - Heater: Good heat
CAB - A/C: Nice and cold
CAB - Seat condition: Good condition
CAB - Cladding condition: Dusty
CAB - Floor mat condition: Dusty, no wear or tears
CAB - Seat belt: Working as should
CAB - Mirrors: Rear view only
CAB - Horn: Loud and clear
CAB - Cab mounts: Good mounts
CAB - Cab glass condition: Good condition
CAB - Cab glass have any cracks: No damage
CAB - Any perspex fitted: None fitted
BLADE - Blade type: PAT
BLADE - Blade width: 4020mm
BLADE - Blade height: 1260mm
BLADE - Pitch ram wear: L/H: 1mm x 1mm, R/H: 1mm x 2mm
BLADE - Lift ram wear: L/H: 1mm x 2mm, R/H: 1mm x 1mm
BLADE - Tilt ram wear: 1mm x 0mm
BLADE - Ball wear: 5mm
BLADE - Link ram wear: 2mm x 2mm
BLADE - C Frame wear: L/H: 3-4mm x 3-4mm
BLADE - Equaliser bar wear: 4mm x 4mm x 4mm
BLADE - Face / Moldboard: Good condition
BLADE - Cutting edge condition: 40mm left
BLADE - Have cutting edges been turned: No
BLADE - General blade condition: Decent shape all around
PAINT & DECALS - Paint condition: Good
PAINT & DECALS - Condition of decals: To be replaced